This program enhances your theoretical knowledge and diving skills. Advanced dive planning, independent systems and stage bottles are just some of the things you will learn in this course. The Technical Wreck course is ideal for Divers with Advanced Nitrox who want to extend their bottom times wisely, to stay longer on a wreck or perform penetration.

18 Years old
IANTD Advanced EANx Diver or equivalent
IANTD wreck / Cavern Diver or equivalent
100 Logged dives, 30 deeper than 27m / 90ft

Theory
Land Drills
Confined and Open Water Training
Wreck dives with 3 different gases
Final Exam

6 Days
8 Hours theory
6 Dives
1 Training dive in shallow water

Maximum depth 51m / 170 ft
Decompression stops are performed with 100% oxygen, or 50% and higher
Maximum oxygen partial pressure of 1.4 ATA at depth
Maximum oxygen partial pressure of 1.6 ATA for decompression
All dives are kept within the limits of the IANTD Oxygen CNS% Clock and OTU’s
4 Students per instructor

Twin tanks with manifold and isolator valve
3+ Independent regulators with first and second stages
1 With long hose (2m/7ft.) and LPI
1 With short hose (~55cm/22 in.) and SPG
1 O2 clean with a meter hose and oxygen pressure gauge
1 Regulator per stage tank with meter hose and SPG
1 Decompression tank for 80%, or 100% oxygen, clearly marked and labeled
1+ Nitrox Stage Tanks with at least 1,400 free litres / 50 cf.
2 Wing units, or 1 wing and 1 drysuit
A lift bag with at least 22.5 kg / (50 lb) buoyancy
Wetsuit
Mask and fins
2 Line cutters, or pruning shears
1 Primary Reel or Explorer Reel to enter the wreck
1 Safety reel with a minimum of 40m of line
Dive computer, or stopwatch and depth gauge
Writing board, or wet notes
Waterproof diving table, or second dive computer
2 Directional arrows
Compass

Note: Certification is required to dive with DPVs.